I hope you enjoyed Beth’s take on the Wax Resist, Spellbindersâ„¢ Style post! I think this is my newest favorite technique :0) Thanks to our Design Team Member Heidi Blankenship for the technique!
Last Saturday, Heidi created a beautiful card and I made a hot chocolate pocket card - can’t decided if I want to give it away or keep it! LOL! This time I thought I’d make a window card using S5-017 Snowflake Frame and cut a sentiment by using S4-110 Classic Ovals LG #3 (the smallest die being #1). The sentiment “Let It Snow!” is from JustRite Stampers’ Christmas Joy Borders & Centers set.
First, I cut a sheet of wax paper into quarters in case I need more than one (aka mistakes). I understand that there some of us who can’t get wax paper locally. Are there papers that have a wax film on them available? I was thinking freezer paper, butcher’s paper or even parchment paper might do the trick.
I cut and embossed the wax papers. The cut sandwich is the same as using “regular” paper.
From the bottom:
White Master Mat
Magnetic Spacer Pad S5-017 Snowflake Frame (cut/ridge side up)
Wax Paper
White Master Mat
Then after cutting the wax paper, I embossed it.
Embossing Sandwich from bottom:
White Master Mat
Tan Embossing Pad S5-017 Snowflake Frame w/ Wax Papers Embedded (cut/ridge side down)
White Master Mat
Carefully take the wax paper out of the die template. Avoid any wrinkles because they might show up in the resist. I flipped the embossed wax frame so that you can see how well it took the embossing.
Now this is where the “magic” begins! Heat up your iron on high (keep it on dry, no steam setting), place your wax frame onto the card front and with a paper towel on top of the it, iron your wax paper into the cardstock. Be careful not to move the frame and make sure to spend a few minutes ironing so that the wax melts onto the cardstock. Not sure if you can see the resist in the picture…
Then with a cotton ball, tap into your dye ink and color in the card front to expose the waxed image for that beautiful resist effect.
Taking the center of the S5-017 Snowflake Frame, I taped (to make it less tacky, I tapped the tape on my jeans = removable tape!) it into position to cut/emboss and make a window into the card.
I stamped my sentiment “Let It Snow” onto a piece of blue cardstock and cut/embossed with the S4-110 Classic Ovals LG #3. Notice I taped again to make sure that I get the image centered properly.
Time to assemble the card! I inked the edges of the center pieces of the S5-017 Snowflake Frame and adhered it to the inside of the card centered so that when the card is closed it would come through the window. Using Scrapbook Adhesives by 3L 3D Foam Squares, I adhered the oval stamped sentiment in the middle to give it dimension. I also added a little glitter in the snowflakes of the stamped image but hard to see in the picture. Tied white ribbon on the side to give it some texture. To finish off, I added Hero Arts Gems for a little sparkle!
This is the finished look! Hope you get a chance to try this technique!
Just a reminder about the Spellbindersâ„¢ Seasonal Limited Edition die templates , they will no longer be manufactured after November 30th 2009 which is not too far off! WOW! So if you’re sitting on the fence about some of these products, I wouldn’t sit there too long! If your favorite Spellbindersâ„¢ retailers run out, they’re gone. So hope you order yours soon!
I’m into color right now. Not sure why. Maybe it is the snow that fell on us in Denver last week and imagining a long winter ahead of us. Earlier this week I checked out our Design Team projects to see what colors of flakes they are, I mean what color flakes they created…Julie Overby made this beautiful Merriest Wishes card with turquoise, white and silver…yummy!
Jennifer Davis‘ layout, I Heart Snow, is outstanding in the color realm. It perfectly matches her daughter’s winter jacket.
I find that once I break out of a mold, it’s easy to keep doing it. Today, I’m sharing a journal with some really hot colors and snowflakes. To begin, I had hot pink printer paper that I printed journal lines on, but I had no idea how I would match colors to it. The Color Wheel is a great place to start and I just happen to have a Color Companion which is really helpful. In this photo you can see the journal pages in the back and the cover just to the left. The other colors are those I used to cut the snowflakes.
I used the S4-222 Create A Flake One to cut/emboss snowflakes from purple, red and pink. I inked them with silver metallic ink and then layered them using Glue Dots by Glue Dots International and 3D Foam Squares, SCRAPBOOK ADHESIVES by 3L. Here is a close up of one of them.
I adhered them to the journal cover and then felt like a border would bring the whole thing together. I chose the S4-218 Lattice Borderabilities® to coordinate. Since this Borderability® is Petite, I cut it twice from one long strip of paper. After cutting the first side, I carefully lined up the second side and ran it though the Wizard™.
In the same way, I embossed one end and then the other. The place where the two border cuts came together can be left alone as a design element
or covered with a little embellishment like I did.
To finish up the journal, I bound it, added a few more flakes and ribbons.
Don’t forget our Spellbindersâ„¢ and Tattered Angels month-long blog hop! Today, we would like to spotlight our Design Team Member Linda Duke! See what she has in store for you by visiting her blog.
Hmm…with gift giving season coming up, I’m thinking I would try my hand at making a box! Since Halloween is just around the corner, why not make a little treat box. See where I’m going with this…box! LOL!
Then score 1/2″ from each short side and 1/2″ on the bottom of the long side of all four S5-019 Labels Eight die cuts. Make sure to cut the corners at the bottom to make the tabs easy to fold.
Â
Adhere to each side making four walls but do not connect the last sides together yet. We need to embellish the walls first before completing the frame of the box.
Taking your S4-226 Harvest Border Petites, cut/emboss the leaves border (this particular border cuts all the way around to make a great accent piece) and stencil with Clearsnap Colorbox Fluid Chalk Chestnut Roan. You’ll need to cut/emboss/stencil four times (for each side). Trim to fit inside the scored lines - approx. 1/2″. Then line up the borders to make a straight line as shown and adhere.
Using the S4-227 Pumpkin Nestabilties® die #3, cut/emboss with orange cardstock and with Sparkle ‘N Sprinkle Burnt Orange Flocking Powder, I textured the pumpkin. Determine which side will be the front of the box and adhere the pumpkin. Mist Tattered Angels Glimmer Mist Raven onto a small flower, dry and add Hero Arts Pearls in the middle. I used Crafty Secrets Creative Scraps Seasonal Calendar/Halloween image and the black pearl pin to go with that glimmery flower.
Now you can put the last sides together to form the frame of the box by using wet adhesive. Then cut 4.5″x 4.5″ size piece of cardstock to make the bottom of the box. With wet adhesive, edge the bottom four sides of the cardstock and then drop it in on top of the scored edges of the box frame. Let dry.
To finish it off, add your favorite Halloween treat and you’ve got yourself a box! Now remember to think inside the box for your next project!
I attached it to a clear block with a bit of adhesive. Then I inked the leaf with Clearsnap Colorbox Chestnut Roan Fluid Chalk Ink.
 Actually I used the same ink, but from 2 different ink pads, and I think it looks pretty cool!
I also added the S4-226 Harvest Border Petite , with a green ribbon under it to add some color.  It’s wrapped around the My Minds Eye Penny Lane Chasse cardstock. I inked through the Borderabilitiesâ„¢ die template like a stencil, to color the embossed areas.  That piece is mounted on brown cardstock.
Don’t forget Spellbindersâ„¢ is partnering with Tattered Angels on a Designer Blog Hop so come join us as we feature Karen Hunsaker today! See what project she created using Spellbindersâ„¢ and Tattered Angels products!
I really enjoy this Spellbindersâ„¢ S4-227 Pumpkins Nestabilities® set! So many different ideas come to mind like what if I added the S7-017 On The Vine Border Grand. What a great pumpkin patch that would be! Well, that’s exactly what I did…a layout of my boys visiting our local pumpkin farm where they had such a blast! It pays to carry around a small camera in my purse to “capture that moment!”
Rather than just a one dimensional pumpkin, I cut two S4-227 Pumpkins Nestabilities® #3 die (the smallest being #1) to create a “puffed” pumpkin. One of the pumpkin shape serves as a base and the other, I cut into sections length-wise as shown (note: I cut the stem off the cut pumpkin). Make sure you have them in the right order so that you can put them back together again.
First I curled each section of the cut pumpkin. Then inked all the edges of the base pumpkin and the cut pumpkin with Clearsnap Queue Ink. I also inked the pumpkin stem with Clearsnap Colorbox Fluid Chalk Dark Moss. Then with wet adhesive that dries clear, I glued each section onto the base. Set aside to dry.
Â
To give my pumpkin some glimmer, I sprayed with Tattered Angels Glimmer Mist Vintage Pink (I also used the Glimmer Mist Gold for the other pumpkins). It’s one way to make a pumpkin “pretty!” After it dried, I reapplied the ink around the edges of the pumpkin and ink the stem to give it a stronger coloring. Repeat the same process with two more pumpkins, I made a total of three (3) “puffed” pumpkins.
Using the S4-226 Harvest Border Petites die #2 (the accent die template - the one with the cut line all around the die template), I cut/embossed a piece from Core’dination ColorCore and stenciled it with Tattered Angels Glimmer Mist Gold. I added the small leaf pieces which I sanded to accent each side of the border. Adhered all to the mat that I cut for the two pictures. Set aside.
I had a pumpkin patch pattern paper in my stash that went well with the theme and adhered both border die cuts onto the page in an “L” shape. I then placed my “puffed” pumpkins onto the border along with a pumpkin die cut used as a journal box. Add the matted pictures along with the title of the farm’s name and a beautiful Fall memory is recorded!
The air is getting cool. The leaves are turning colors. Kids are planning Halloween costumes and me? I’m buying candy corn. I love the fresh, soft and sweet taste of these seasonal tri-colored confections. I eat them all month.
But then by November 1st, I can’t stand’em for another year.
Yet, this crazy cycle inspired today’s project using the Limited Edition Pumpkins Nestabilities®, and Harvest Borderabilities® Petite die templates. My little candy glass is perfectly sized to sit right by my keyboard and keep me company while I create and write. I hope it will inspire you to create your own “desk mate” for October or other season of treating!
Instructions:
Cut two 1½x12″ strips of the yellow, white and orange papers. Cut one 2″x12″ strip from the orange paper. Using the 2″ orange strip, cut/emboss S4-226 Harvest Borderabilities Petite (two times). Color the borders and die-cut leaves with metallic rub-ons to give definition to the embossing. Adhere the borders to the glass. I trimmed off the outer parts of the strips at the leaf, as shown here.
Then to make the strips lay horizontally, I snipped the top part of the center leaf and stretched the borders down. I adhered a tiny die-cut acorn to cover the openings. Add the die cut leaves around the glass.
To make the pumpkin “picks,” glue the yellow, orange and white strips together creating stripes. Cut/emboss four #4 pumpkins from the stripes. Stamp the sentiment onto the pumpkins. I chose “Sweet on You.” If desired, sand the pumpkins and add some metallic rub-ons for a distressed look. Glue two pumpkins back-to-back with the bamboo stick at the center. To make one shorter, trim the stick with wire cutters. Cut/emboss On the Vine Borderabilities® Grand from brown checked paper. Trim it to add vines and leaves to each of the large pumpkins.
Taking your 3″ of reserved paper, glue these strips together closer than the for the large pumpkins. Cut/emboss the #1 pumpkin from this. Using a head-pin and jewelry tools, add a green bead to the pin and string it onto the pumpkin, giving it a “Z” turn so it can hang from the glass like a charm.
To finish it up, add the charm to the glass, add some yummy candy corn, place your picks in the candy and ENJOY!
NOTE: Just wanted to remind you that Spellbinders is teaming up with Tattered Angels for a blog hop. Why not hop on over to Terre’s Blog: Terre’s Scrap Therapy for an amazing project using Tattered Angels products and, of course, some Spellbindersâ„¢ products too!
After reading Beth’s Savvy Saturday idea, I had a “light bulb” moment! Why not finish my fall holiday card swap using this method?! Rarely I join a swap because when it comes close to deadline, I haven’t even started! Has that happened to you? I’m sure I am not the only one! LOL! But using the W-026 Grand Cut Mat Kit, I can create these cards in half the time so why not start today. Maybe an incentive to join more swaps?!
I will be creating five fall holiday cards that will shipped to Japan where the host lives. This swap is an international swap so I am excited about getting ideas from different countries…a worldwide card making effort! If some of the participants follow this blog, I will only show two of the cards and leave the others as a surprise!
Grabbing the JustRite Stampers Favorite Occasions images, I stamped a total of five times on a 2 1/2 x 12″ strip of Core’dinations Color Core cardstock. Taking household tape and tapping it on my jeans to make it a less tacky (very high level technique!), I taped the flat side (not the cut side) of the die template to the cardstock to hold it in place when cutting and embossing. Notice I’m using two different sizes of die templates (S4-114 Standard Circle Large #3 and S4-116 Standard Circle Small #3) but as mentioned before they are only 1/8″ difference and really doesn’t hinder the design of the cards. Another advantage is I am able to cut/emboss two images in one pass instead of one at a time with the Grand Mat Kit.
In addition to this clever idea, I also wanted to use the Grand Mat Kit for its original use - cut/emboss Borderabilities® Grand. Cutting the S7-014 Grand 12″ Classic Lace Border with a strip of white cardstock, I wanted to add a little vintage accent to the card. I stenciled with Clearsnap ColorBox Ink in Dark Moss and lightly tapped brown chalk to the lace.
With the 4 x 5.5″ card base made out of My Mind’s Eye Fall In Love Collection, I rounded the corners and inked the edges with Clearsnap ColorBox ink. Using the various die cuts, I adhered them for each card front along with ribbon and other embellishments to accent. The use of Crafty Secrets Heartwarming Vintage Cuts “Autumn Blessings” and Creative Scraps “Calendar” really made it come together. Now I think it’s ready to be sent off on a worldwide journey!
Happy World Card Making Day! We’re doing a little celebration on our Facebook Page, you can add your Spellbindersâ„¢ creations and we’ll pick a winner via random drawing. You could win a free Spellbindersâ„¢ die template! Be sure to become a fan!
On to today’s project! I recently organized a fundraiser for a family adopting a child half a world away. My friends and family supported my efforts and I wanted to make them each a thank you card.  I’m a slow crafter, so my goal was to design a card that was not too complicated and efficient to make. I already had coordinating cardstock and enough pattern paper to make the cards.Â
Next I needed to do some die cutting and embossing. If I make 20 cards, and each has four die cuts using four different colors of paper, I’ll either be up all night or I’ll have to streamline the process. This is what I did:
I stamped the JustRite Stampers ”Thank You” sentiment 20 times onto white cardstock.  I cut/embossed 2 die templates in one pass, the S4-114 Standard Circles, Large #3, and the S4-116 Standard Circles, Small #3 . The difference between the dies is 1/8 inch. Eli explained the differences between the Nestabilitiesâ„¢ sets here. Yes, I had 2 different sized circles, but that’s ok, they both look nice with the stamped image.
Next I assembled the cards.  I used either two trees or two leaves on each, and used a 3D Foam Adhesive Square from SCRAPBOOK ADHESIVES by 3L to add dimension.
I know, they are not complicated cards, but I think my friends will appreciate my efforts. I’ll also add a personal note to the inside.
I am using World Card Day to make the world just a little bit smaller for one family. I hope you can make your world smaller by sending a few cards to those you care about.
Yesterday was Autumn Equinox (the equinox divides the day and night equally) which means we are officially into Autumn. So what a great excuse to make a card just for the season!
Just to recap, I’d like to go over the sandwich recipes that you will be using on the pumpkins:
1. Cut Sandwich (from bottom):
White Master Mat
Magnetic Mat (black side up) S4-227 Pumpkins Nestabilities® die #2 (ridge up/cut side up)
Cardstock
White Master Mat
2. Emboss Sandwich (from bottom):
White Master Mat S4-227 Pumpkins Nestabilities® die (with cardstock embedded/cut side up)
Tan Embossing Pad
White Master Mat
Repeat this process five more times and make sure you sand each piece to show off that design. You will need a total of six embossed/impressed pumpkins to achieve the accent shown on the card pictured below. Fold each pumpkin in half, adhere one side to one side of another pumpkin’s side, connecting them. Make sure you have a flat side to adhere the 3-D pumpkin to the card base. Set aside to adhere to the card as a last step.
I continued to cut and emboss the S5-019 Labels Eight die #5 and two of the Doodle Parts long thin swirl die. Note that I have stenciled the long thin swirl die with Clearsnap Fluid Chalk Ink Chestnut Roan before taking the papers out of the die. Make sure to clean the ink off of your die.
Using the Clearsnap chalk ink, I inked the edges of: Crafty Secret Fall Cotton Scraps, S5-019 Labels Eight die cut and card base (make sure to corner round the card base first). Adhere all the parts as shown with the exception of the pumpkin. I used Flower Soft Autumn to accent the image and let dry. Lastly, the pumpkin was adhered to make a wonderful (and colorful) card!
I love the fall. The weather starts to cool off. The leaves begin to turn and it is a great time of year to snuggle with loved ones. It’s also a great time (with all the approaching holidays) to get engaged. I thought it would be fun to create a fall-themed engagement card. I loved the technique Margie used on her Savvy Saturday post: Partial Impressabilities. So I wanted to use the same technique on this card:
Supplies: Wizard, I2-1001 Impressabilities Paisley, S4-190 Labels Four (3), S5-014 Small Deckled Mega Rectangles (#4), Core’dinations red and orange cardstocks, Chatterbox Artsy.licious gold embossed paper, Creative Impressions heart brad, Copic Spica Chocolate glitter pen, Scrapbook Ahesives: 3D Foam Squares and Photo Tape, JustRite Brayton letter stamps–90, 50 point and Horizontal Wood Block; Letter stickers, Brown die ink
After you collect your supplies, it’s time to cut apart your Impressabilities template so you can emboss just a portion of it. It is super easy. I just grabbed a pair of hardy scissors and snipped the fine metal pieces connecting the paisleys to the frame.
The sandwich for embossing with Impressabilities is as follows:
White Master Mat
Impressabilities template
paper, misted with a little water
Tan Embossing Pad
White Master Mat
I built this sandwich upside down so you could see it better. Just remember the paper must be in between the Impressabilities (or other embossing element) and the Embossing Pad. Feed your sandwich through the Wizard to emboss.
Using the Core’dinations cardstock gives me a fabulous design element right within the paper. Just do a little sanding to bring out the core color. When I use Impressabilities, I actually like to sand both sides so I can see which one I want to use. I chose the one on the right.
Trim the piece to a square and save the scrap as you’ll be using it later. Finish up with the Wizard by cutting/embossing Labels Four die template and only cutting Small Deckled Mega Rectangle from the cream/gold paper.
Using brown ink, stamp {FALL} onto the Labels die cut. Add a little shimmer to the ink with a glitter pen. For the inside sentiment, stamp CONGRATULATIONS onto the scrap of red Core’dinations cardstock. Add glitter pen. Write “on your” with the same pen and add letter stickers for “engagement.” You’ll probably need to trim the sentiment block just a bit before adding it to the Deckled rectangle.
Now let’s put it all together. Adhere “Fall” label to cardstock using Foam Adhesive. Add letter stickers onto the bottom, using a heart brad with an “O” sticker on it as shown. Mat onto cream/gold paper and adhere to card base made from Orange Core’dinations cardstock. Add the sentiment to the inside and you have a beautiful fall, engagement card.
