No one I know has enough time or money so today, I want to share with you some techniques that I have learned to work efficiently AND get the most out of my supplies. I’m trying to actually get my Christmas cards out before Easter this year so I’m working on them early. First, I came up with a basic design that is simple yet elegant:

Check out the following tips for efficiency and frugality (is that a word?) when designing a big batch of cards.

1. Make them different?
My first big revelation about creating multiples is that they don’t have to be exactly the same. In general, no one will ever know. And, I decided, if they do find out…I’m ok with that. This practice keeps my supplies in check and I find it a little more interesting to change up my design as I progress.

2. Cut multiple dies at one time:
Beth gave us a fabulous example of this in her post Fall Thank You cards.
I layered 2 strips of paper on my favorite labels die templates: S4-169 Small Labels (#4, counting from the center), S5-006 Curved Rectangles (#2), S5-019 Labels Eight (#3) on the W-026 Grand Cut Mat Kit and cut/embossed in the Wizard™. In no time I had plenty of labels.

3. Use an assembly line approach: “component passes from station to station…and something is done or added to it. By the last station, the product is fully assembled and is identical to each one before and after it. This system ensures that a large quantity of uniform-quality goods are produced at a relatively low cost.”~ (science.jrank.org)  So, actually,  I cut and folded my card bases. Then I cut all my labels and stamped them.

4. Use your scraps:
I decided on a couple of papers that I really liked. The tan one had an interesting pattern that I wanted to keep intact. I cut strips in two sizes. Then I cut the red striped paper 1″ larger. You can also see two different label dies and two different stamps from the same set.

When I ran out of the tan patterned paper, I decided to try something a little different and add Magic Mesh in place of it. I added a ribbon for just a little something extra.

Finally, I had small pieces of the red striped paper left over so I created an almost totally different card as seen here:

So, my last card looked a lot different than my first card but I was able to use my supplies in the most efficient manner. I love that!

I hope you found some tips you can take into your craft room for the approaching holidays.

Supplies: S4-169 Small Labels, S5-006 Curved Rectangles, S5-019 Labels Eight, W-026 Grand Cut Mat Kit, W-001 Wizard™, Hero Arts Good Cheer Messages stamps, Magic Mesh green thin weave, Glue Dots International Craft Glue Dots, white cardstock

Cheers, Eli

Trick or Treat!  No tricks, just treats for you here!  The first treat is a double on the Tattered Angels Blog Hop!  Design Team Member Lisa Rapp and our very own Eli Harlan are both showcasing some Tattered Angels love today, be sure to visit both of their blogs.  And don’t forget to see what Tattered Angel’s Blog has in store too.

Now on to Halloween.  Halloween is for kids, and kids of all ages dress in costumes!  Super Heros, Princesses, Monsters, Celebrities, Politicians, Ninjas, Ghosts and just about anything else goes when it comes to Halloween.  Some people even wear costumes to work! This picture is the Spellbinders™ crew in Phoenix!  I’m sure they had a lot of fun, and plenty of candy too!

For today’s post I put together a cute Halloween mini book.  I had a sheet of vintage images waiting for the perfefct project, and this is it!  I didn’t take a lot of step shots, but you will see it is a pretty straight forward book.

I started with the largest of the S4-227 Pumpkins and cut 4 chipboard pumpkin shapes as bases for the pages.  In my Wizard™ I cut/embossed 8 more from patterned paper, Fancy Pants Trick or Treat Collection and an orange piece from Daydreams, these covered both sides of the chipboard.  I spritzed the pumpkin die cuts with Glimmer Mist by Tattered Angels, and when they were dry I sanded the edges.  I have several colors of Glimmer Mist and tried to match them with the colors of the papers.  Look at the results!

Ohhhhh, glimmery!

I cut a piece of Core’dinations Black Magic Cardstock with the S4-227 Pumpkins Nestabilities, to make pumpkin shaped frames by nesting the die templates.  See how I set them on my Magnetic Spacer Plate.  This gave me 2 frames and 3 full pumpkins.  I cut/embossed then sanded the black side to reveal the orange color underneath.

The rest of the book is just stacking, layering, inking, sanding and having fun.

The book includes a variety of Spellbinders™ die templates, including the following:
S4-227 Pumpkins; S7-014 Classic Lace Border Grand, S5-014 Deckled Mega Rectangles SM; S4-131 Classic Scalloped Rectangles SM; S4-235 Fancy Tags; S4-169 Small Labels; S4-200 Flower Bouquet; S4-161 Labels One; S4-190 Labels Four; S5-019 Labels Eight; S4-233 Labels Nine, S4-134 Classic Paisley.

Other supplies include: Fancy Pants, paper; Tattered Angels, Glimmer Mists; Crafty Secrets, Heartwarming Vintage images; Creative Impressions, Ribbons; Clearsnap, Colorbox Charcoal Fluid Chalk Ink; Copic, Atyou Spica Pitch Black; Cardstock; Alpha rub-ons; adhesives; hole punch; book ring.

Happy Halloween!
Beth

Don’t forget our Spellbinders™ and Tattered Angels month-long blog hop! Today, we would like to spotlight our Design Team Member Linda Duke! See what she has in store for you by visiting her blog.

Everyone says “think outside the box” but have you ever thought of “the box?” So thinking inside the box, I went into my “box” of Spellbinders™ die templates to find S5-019 Labels Eight, S4-226 Harvest Border Petites and S4-227 Pumpkin Nestabilities®.

Hmm…with gift giving season coming up, I’m thinking I would try my hand at making a box! Since Halloween is just around the corner, why not make a little treat box. See where I’m going with this…box! LOL!

First we need to cut/emboss four S5-019 Labels Eight die #6 (#1 being the smallest) with My Mind’s Eye Fall In Love Collection.

Your cut sandwich will be (from the bottom):
White Master Mat
Magnetic Spacer Plate
S5-019 Labels Eight die #6 (cut/ridge side UP)
Cardstock
White Master Mat

After cutting your cardstock, remove the Magnetic Spacer Plate and grab your Enlarged Embossing Pad for your emboss sandwich (from the bottom):
White Master Mat
S5-019 Labels Eight die #6 (w/ cardstock, cut side UP)
Enlarged Embossing Pad
White Master Mat

Then score 1/2″ from each short side and 1/2″ on the bottom of the long side of all four S5-019 Labels Eight die cuts. Make sure to cut the corners at the bottom to make the tabs easy to fold.

Adhere to each side making four walls but do not connect the last sides together yet. We need to embellish the walls first before completing the frame of the box.

Taking your S4-226 Harvest Border Petites, cut/emboss the leaves border (this particular border cuts all the way around to make a great accent piece) and stencil with Clearsnap Colorbox Fluid Chalk Chestnut Roan. You’ll need to cut/emboss/stencil four times (for each side). Trim to fit inside the scored lines - approx. 1/2″. Then line up the borders to make a straight line as shown and adhere.

Using the S4-227 Pumpkin Nestabilties® die #3, cut/emboss with orange cardstock and with Sparkle ‘N Sprinkle Burnt Orange Flocking Powder, I textured the pumpkin. Determine which side will be the front of the box and adhere the pumpkin. Mist Tattered Angels Glimmer Mist Raven onto a small flower, dry and add Hero Arts Pearls in the middle. I used Crafty Secrets Creative Scraps Seasonal Calendar/Halloween image and the black pearl pin to go with that glimmery flower.

Now you can put the last sides together to form the frame of the box by using wet adhesive. Then cut 4.5″x 4.5″ size piece of cardstock to make the bottom of the box. With wet adhesive, edge the bottom four sides of the cardstock and then drop it in on top of the scored edges of the box frame. Let dry.

To finish it off, add your favorite Halloween treat and you’ve got yourself a box! Now remember to think inside the box for your next project!

Hope you have a wonderful Saturday!!
MargieH

I can not tell a lie…I love S4-227 Pumpkin Nestabilities® die template, and since it is a limited edition, I want to give you plenty of reasons to get it before it is gone. But before I give you this Savvy Saturday’s tutorial, let’s hear it for our Tattered Angels Blog Hop:

They are hosting it with our Design Team and my friend, Kazan Clark at Nunu Toolies is on deck today. Make sure to visit her blog to see her amazing project using products from Spellbinders™ and Tattered Angels.

Halloween is just around the corner and I wanted a little “tchotchke” to put on my table {my 10 year old said she liked that word, “tchotchke” yesterday…lol…”Me too sweetie!”} Anyway, I’m revisiting a technique that I love: making a stamp with Spellbinders™ die templates and fun foam. Check it out when you are done here.

With the technique in mind, I gathered fun foam, orange ink, S4-227 Pumpkins Nestabilities® and some Dottie Ann Magic Mesh. I love Dottie Ann’s shape and its adhesive backing and thought it might make some fun stamping texture. Here is the full supply list.

Supplies: S4-226 Harvest Border Petite, S4-227 Pumpkins Nestabilities®, S5-006 Curved Rectangles, S4-161 Labels One, S4-162 Labels Two, S5-019 Labels Eight, S4-169 Small Labels, Wizard™, W-026 Grand Cut Mat Kit, Core’dinations Green color core cardstock (1-3/4″ strips), Magic Mesh Dottie Anne, Clearsnap ColorBox Chestnut Roan chalk ink, Creative Impressions mini brads and photo turns, Glue Dots, lines and dots; SCRAPBOOK ADHESIVES by 3L, 3D squares; white cardstock, Orange Distress Ink, white letter stickers, fun foam, “Happy” stamp, sandpaper, double sided removable tape

I began by creating my own embossing template. I placed a strip of Dottie Ann onto cardstock. Since I didn’t want to notice the “seam” in the final project, I cut off the bottom edge.

I added the second piece, cutting off one edge, placing the cut edges together, matching up the circles.

I cut the fun foam with S4-227 Pumpkin Nestabilities® using the regular Wizard™ cut sandwich:

• Master Mat
• Spacer Plate
• Die Template with cut ridges facing up
• Fun Foam
• Master Mat

.

.

Embossing followed its regular sandwich:

• Master Mat
• Texture (in this case my Dottie Ann sheet)
• Fun Foam
• Embossing Pad
• Master Mat

.

.

After I ran the pumpkin stamp through the Wizard™ with the Dottie Ann texture sheet, I noticed how flat the embossing was, I thought the embossing was too “thin” to show up as a stamp texture. But it was worth a try…I taped it (double sided removable) to a foam block, inked it up and pressed it onto smooth white cardstock and what do you know? I got the look I wanted! I stamped 4 more and love them!

I cut each stamped image out with a different die template. I used #5 die template from the following sets: S5-006 Curved Rectangles, S4-161 Labels One, S4-162 Labels Two,  S4-169 Small Labels, and used #4 with S5-019 Labels Eight.

Using the S4-226 Harvest Border Petite and my W-026 Grand Cut Mat Kit, I created a long border. Since there is only one cut edge on this Borderabilities® die template, you can create endless borders. This is what I found worked the best:

I built the sandwich “upside down,” placing pieces of double sided removable tape at the ends of the Master Mat and sticking the Core’dinations strip onto it. I added the die template at one end, cut edge down, carefully placing the W-024 Magnetic Spacer Plate and adding the other Master Mat. Through the Wizard™ it went.

To cut the center section, I moved the die template down until the pumpkin “hole” and edge fit snuggly.

I cut again and then repeated the process for the last section.

I embossed the first section and then sanded it–giving me the “fresh” emboss (versus embossing and then running it through the Wizard™ for the second cut and flattening the first emboss). I repeated this 2 times to complete the strip. I created two borders, overlapped and adhered them.

To assemble, I laid out my pumpkins, added the stickers and stamped “Happy.” I embellished the tags with mini pumpkin die-cuts, brads and photo turns and accordion folded the piece so it would stand up on its own. Yeah! Here is is!

And to what it says, “Happy Halloween” not only from us but also from Tattered Angels!

Enjoy the weekend, Eli

Don’t forget Spellbinders™ is partnering with Tattered Angels on a Designer Blog Hop so come join us as we feature Karen Hunsaker today! See what project she created using Spellbinders™ and Tattered Angels products!

I really enjoy this Spellbinders™ S4-227 Pumpkins Nestabilities® set! So many different ideas come to mind like what if I added the S7-017 On The Vine Border Grand. What a great pumpkin patch that would be! Well, that’s exactly what I did…a layout of my boys visiting our local pumpkin farm where they had such a blast! It pays to carry around a small camera in my purse to “capture that moment!”

Rather than just a one dimensional pumpkin, I cut two S4-227 Pumpkins Nestabilities® #3 die (the smallest being #1) to create a “puffed” pumpkin. One of the pumpkin shape serves as a base and the other, I cut into sections length-wise as shown (note: I cut the stem off the cut pumpkin). Make sure you have them in the right order so that you can put them back together again.

First I curled each section of the cut pumpkin. Then inked all the edges of the base pumpkin and the cut pumpkin with Clearsnap Queue Ink. I also inked the pumpkin stem with Clearsnap Colorbox Fluid Chalk Dark Moss. Then with wet adhesive that dries clear, I glued each section onto the base. Set aside to dry.

To give my pumpkin some glimmer, I sprayed with Tattered Angels Glimmer Mist Vintage Pink (I also used the Glimmer Mist Gold for the other pumpkins). It’s one way to make a pumpkin “pretty!” After it dried, I reapplied the ink around the edges of the pumpkin and ink the stem to give it a stronger coloring. Repeat the same process with two more pumpkins, I made a total of three (3) “puffed” pumpkins.

Using the S4-226 Harvest Border Petites die #2 (the accent die template - the one with the cut line all around the die template), I cut/embossed a piece from Core’dination ColorCore and stenciled it with Tattered Angels Glimmer Mist Gold. I added the small leaf pieces which I sanded to accent each side of the border. Adhered all to the mat that I cut for the two pictures. Set aside.

Using My Mind’s Eye Fall In Love Collection, I cut/embossed two (2) S7-017 On The Vine Border Grand with the Grand Cut Mat Kit. I then stenciled using Clearsnap Colorbox Fluid Chalk Dark Moss.

I had a pumpkin patch pattern paper in my stash that went well with the theme and adhered both border die cuts onto the page in an “L” shape. I then placed my “puffed” pumpkins onto the border along with a pumpkin die cut used as a journal box. Add the matted pictures along with the title of the farm’s name and a beautiful Fall memory is recorded!

Have a great Saturday!!
MargieH

After reading Beth’s Savvy Saturday idea, I had a “light bulb” moment! Why not finish my fall holiday card swap using this method?! Rarely I join a swap because when it comes close to deadline, I haven’t even started! Has that happened to you? I’m sure I am not the only one! LOL! But using the W-026 Grand Cut Mat Kit, I can create these cards in half the time so why not start today. Maybe an incentive to join more swaps?!

I gathered my Spellbinders™ items to start creating: S4-114 Standard Circle Large #3 die (#1 being the smallest die template), S4-116 Standard Circle Small #3, S4-161 Labels One #4, S4-229 Labels Five #4, S4-233 Labels Nine #4, S4-230 Labels Six #4, S7-014 Grand 12″ Classic Lace Border, S4-227 Pumpkins Nestabilities® #2 & #3 and S4-228 Nested Maple Leaf #1 & #2.

With My Mind’s Eye Fall In Love Collection (using various pattern papers), I cut/embossed S4-227 Pumpkins Nestabilities® #2 & #3 and S4-228 Nested Maple Leaf #1 & #2 by using the W-024 Magnetic Spacer Plate. I then edged the die cuts with Clearsnap ColorBox inks and set aside.

I will be creating five fall holiday cards that will shipped to Japan where the host lives. This swap is an international swap so I am excited about getting ideas from different countries…a worldwide card making effort! If some of the participants follow this blog, I will only show two of the cards and leave the others as a surprise!

Grabbing the JustRite Stampers Favorite Occasions images, I stamped a total of five times on a 2 1/2 x 12″ strip of Core’dinations Color Core cardstock. Taking household tape and tapping it on my jeans to make it a less tacky (very high level technique!), I taped the flat side (not the cut side) of the die template to the cardstock to hold it in place when cutting and embossing. Notice I’m using two different sizes of die templates (S4-114 Standard Circle Large #3 and S4-116 Standard Circle Small #3) but as mentioned before they are only 1/8″ difference and really doesn’t hinder the design of the cards. Another advantage is I am able to cut/emboss two images in one pass instead of one at a time with the Grand Mat Kit.

In the Wizard™, I cut/embossed the different label die templates on to a 3.5 x12″ strip of Core’dinations Chocolate Box cardstock and sanded the edges to finish. From left to right: S4-161 Labels One #4, S4-233 Labels Nine #4, S4-229 Labels Five #4 and S4-230 Labels Six #4.

In addition to this clever idea, I also wanted to use the Grand Mat Kit for its original use - cut/emboss Borderabilities® Grand. Cutting the S7-014 Grand 12″ Classic Lace Border with a strip of white cardstock, I wanted to add a little vintage accent to the card. I stenciled with Clearsnap ColorBox Ink in Dark Moss and lightly tapped brown chalk to the lace.

With the 4 x 5.5″ card base made out of My Mind’s Eye Fall In Love Collection, I rounded the corners and inked the edges with Clearsnap ColorBox ink. Using the various die cuts, I adhered them for each card front along with ribbon and other embellishments to accent. The use of Crafty Secrets Heartwarming Vintage Cuts “Autumn Blessings” and Creative Scraps “Calendar” really made it come together. Now I think it’s ready to be sent off on a worldwide journey!

Thanks for stopping by!
MargieH

We’ve had almost a whole month of awesome posts on Impressabilities™ and I thought it would be fun to remind you of a few techniques you might have learned this month, teach you a new one and use it all on a card…with Partial Impressabilities™, Impressabilities™ Letterpress, Chalk over Ink and using one of our most popular Limited Edition die templates…all in one card. Sound like too much?

Naaaaah, we like to put it all together.

So, just to remind you, Beth put together this tutorial on how to use Impressabilities™ as a Letterpress and Margie put one together last Saturday on how to use a Partial Impressabilities™. So I used both those techniques but also want to share with you a technique that Stacey Caron created. It is simply called “Chalk over Ink”. It’s not too challenging but gives a great “wow” effect. Let’s check it all out, step-by-step.

Gather your supplies: Wizard™, S4-227 Pumpkins Nestabilities®, I2-1001 Impressabilities™ Paisley, S4-235 Fancy Tags, The Robin’s Nest Halloween Swirl patterned paper, Cosmo Cricket “Girl Friday” patterned paper, Clearsnap ColorBox cat eye inks in Chianti and Picante, Taylored Expressions sentiment stamp, Creative Impressions ribbons, 3L SCRAPBOOK ADHESIVES–Black 3-D Adhesive Squares and Photo Tape, Decorating chalks, Hole punch, Green staples, Stapler

Next you might want to go review the techniques in the links above. You’ll need to cut one of your Impressabilities templates and letterpress some paper using a slow-drying pigment ink. I started by using green ink as in this example but tried orange and used it for the final card.

Then just color away with your decorating chalks. I like to use my bare finger to rub color over the inks and around on the smooth cardstock. You’ll notice the ink seems to grab onto the chalk, intensifying the color. I used several colors–red, orange, green and yellow–on this to get the desired effect.

Next, cut the letterpressed paper using the largest Pumpkins Nestabilities™ so that the letterpress image shows right where you want it. I do not emboss over letterpress as it tends to flatten the image.

The rest is up to you…After creating the Letterpressed pumpkin, trim a background mat to 5-1/4  by 5-1/4″ and add it to the card base (11×5-1/2″) folded in half. Punch a hole in the stem of the pumpkin, thread the ribbons through it and staple to secure. Stamp a sentiment onto paper and cut/emboss it with S4-235 Fancy Tags. Adhere the pumpkin by placing a double layer of 3-D adhesive squares down the middle. Add 3-D squares to the sentiment tag and add to the card: VOILA a lovely, fall friendship card, using several techniques.

Eli

For Savvy Saturday, I thought I would cut apart my Impressability. It’s OK - LOL!! It’s one of the reasons why I purchased two of the same kind. The results are stunning.

Since the weather is getting cooler and the days seem to be getting shorter, my mind is in fall mode. Wandering around the Chicago Scrapbook Expo a few weeks ago, I grabbed Crafty Secret Fall Homespun Cotton Scraps. Perfect for just this occasion! Here are some other items I gathered for today’s project: I2-1009 Impressabilities™ Flourish, S7-017 On The Vine Border Grand, S4-228 Nested Maple Leaf die #1 ( the smallest size), S4-132 Classic Rectangles Large die #5 and S4-227 Pumpkins Nestabilities® die #2.

I picked the I2-1009 Impressabilities™ Flourish because of the swirl designs, it went well with the fall theme. While cutting the Flourish to use as a border, I discovered that it really wasn’t connected to each other, just an individual flowery swirl. But that was fine, I placed each flourish next to each other to look like a border. Using the Core’dination cardstock, I misted the area where I would emboss.

The embossing sandwich I used was (from the bottom):
White Master Mat
Tan Embossing Pad
Cardstock
I2-1009 Impressabilities™ Flourish
White Master Mat

After feeding the sandwich through the Wizard, I left the Impressability pieces embedded in the cardstock. I flipped the cardstock over and proceeded to sand over the embossed area. I do this so that my embossing stands out even more. Then I took out the pieces of the Impressability and set the card base aside. 

S7-017 On The Vine Border Grand, I only cut and emboss a small part as I only needed one of its leaf to add onto the pumpkin…don’t forget to ink the leaf before adding (hint: I inked the edges first and then gently pressed the entire leaf face down onto the ink pad)! I cut and embossed three (3) S4-228 Nested Maple Leaf die #1. With the rest of the die templates, I cut and embossed one of each using My Mind’s Eye pattern papers. Inked the edges of all including the card base and Crafty Secret Cotton Scraps image. Adhere all as shown below…note that the S4-227 Pumpkins Nestabilities® and the orange S4-228 Nested Maple Leaf are raised using foam tape by Scrapbook Adhesive By 3L. Also, if you look closely, you will see I added touches of Flower Soft onto the image where the leaves are…wonderful accent!

Design Team Member Karen Hunsaker also created a card by cutting apart the I2-1001 Impressabilities™ Paisley. Going further with the Paisley theme, she also cut and embossed the S4-135 Classic Scalloped Paisley with the Core’dinations Chocolate Box cardstock. Stamped “thanks” from Hero Arts using Clearsnap ink, this card is ready to go!

Thanks for stopping by! Have a great Saturday!
MargieH

We’re excited to share a new technique created by our Design Team member, Karen Taylor. She shared it first on her blog, Creative Yearnings, and we thought it was so great that we had to share it here too.

I am excited to share a new Spellbinders™ Impressabilities™ technique with you. It is a heat embossing technique.

To do the technique you will need fun foam or foam letters, an Impressabilities™, a hot pad and a heat tool.

Using your hot pad, heat the Impressabilities™ with a heat gun. Heat for at least 30 seconds and lay it on your foam. Gently press with hot pad. Let cool and lift the Impressabilities™

This is a very versatile technique. Since fun foam can be cut in the Wizard™, the possibilities are endless.

This is sure to be come a favorite technique….I know it is mine! Karen Taylor

WOW, Karen, that looked so fun that I had to try it on my layout featuring my daughter’s fall picnic at school.

I found the fun foam to be a little more challenging to “take” the embossing than I did the foam letters. So I modified the technique just a bit. First. I like to work on a 12×12″ ceramic tile. You know, the kind you get at the home store for a couple bucks. It is heat resistent and gives me plenty of room to work. I cut my three ovals (S4-140 Petite Ovals Small) from Burgundy fun foam. I placed the Impressabilities™ template on the tile and heated it with my heat tool. I was so tempted to check to see how hot it was before I laid my foam oval on but decided that was not a good idea.

As soon as I removed the heat, I placed the foam oval on top of the Impressabilities™ template and then pressed down on the foam using an acrylic block. I could see through the block and it pushed the foam down into the template in an even manner. I noticed that the places on the template that were the hottest, actually gave the foam a shiny look…so cool. Here is a close up of the embossing!

I created three of these ovals, changing the placement on the template for variety. I wanted to echo the template again on the page, so I embossed 2 sections of a cardstock strip, added metallic rub-ons for emphasis and adhered it with  the title. Next went the photos and journaling blocks on top of my embossed ovals. Voila! Not too difficult and definitely worth it. Thanks, again, Karen for the fabulous new technique and great inspiration.

Eli

Today’s Savvy Saturday is all about  Letterpress.  This technique dates back to the year 1450, with thanks going to Johannes Gutenberg, as the main method of printing until the invention of offset printing. That is today’s history lesson.

You can do this technique with Spellbinders’™ Impressabilities™!  I started by playing with ink.  I rolled my brayer across an ink pad, then onto the I2-1004 Impressabilties™ Flowers.  I built my sandwich this way:

• White Master Mat
• Inked Impressabilties™ (ink side up)
• Paper
• Embossing Mat
• White Master Mat

Feed the sandwich into the Wizard™.  One pass in the Wizard™ will emboss the paper and transfer the ink into the debossed areas. This is the result with Clearsnap ColorBox White Pigment Ink and black cardstock:

Then I tried acrylic paint. This is the result with Ranger’s paint.  This is a fast drying acrylic paint, and despite working quickly, I am not 100% happy with the coverage in this example. We’ll come back to paint another time.

So then I got to thinking, if ink works, what about ink and embossing powder? I used the brayer to apply Clearsnap Top Boss Watermark Ink to the Impressabilities™, fed the sandwich through the Wizard™ and then applied Sparkle and Sprinkle’s Outerspace Embossing Powder. I heated the paper to melt the powder. Oh my! Its beautiful! Check this out:

Then I did the reverse stencil technique with Clearsnap Black Pigment Ink and S4-234 Ribbon Tags Trio  2, the oval shape. I stamped “thank you” from Hero Arts onto the label with the same ink, and added ribbon from my stash.  It needed just one more thing, so I cut an oval using S4-112 Classic Ovals, Small #4, from the same patterned paper, which is Fancy Pants Caroling.  I mounted that onto black cardstock.

I love the texture and sheen from the embossing powder, don’t you?

Spellbinders™ Die Templates used: S5-019 Labels Eight, S4-112 Classic Ovals, Small #4, S4-234 Ribbon Tags Trio 2, I2-1004 Impressabilities™ Flowers.

Here are a few examples from our Design Team Members:

 Janine Blackwelder also used Impressabilities™ Flowers for this bookmark.  She cut the Impressabilties™ apart and letterpressed a small section.  Clearsnap ink, Hero Arts stamps, and the S4-112 Classic Ovals, Small as well as S4-113 Scalloped Classic Ovals, Small were used on this project.

Julie Overby embossed her chipboard letters with Impressabilities™ Flowers. On the card she used S5-019 Labels Eight; 12-1004 Impressabilities™ Flowers;  Cardstock; Patterned paper; Cosmo Cricket and Maya Road chipboard; ClearSnap Colorbox Ink.

Have a wonderful Saturday!
Beth

PS. Don’t forget to go over to “When Creativity Knocks!” - and vote for Impressabilities™ in the Great Crafter’s Tool Hunt…you could win something cool and we would win ultimate fame and glory (maybe even a trophy? who knows). Click HERE for more info.  Voting closes September 8 at midnight PST.