Great tips on card making, Eli! I’m getting into the Christmas spirit early, I’ve knocked out a few cards that only took a few minutes to assemble.  I used one 12″ Borderabilities® die template to make several cards.

First let me thank Design Team Member Debbie Seyer for her Poinsettia Card (click for details and instructions!), my inspiration for today’s post.

This is what I designed:

How are they similar? We both used the S7-016 Poinsettia Border Grand, and we both hand trimmed the border to use pieces of it. Debbie used all the pieces on one card, I used the pieces to make four cards.

My cards are made from these supplies: Spellbinders™ S7-016 Poinsettia Border Grand; S7-014 Classic Lace Border Grand; S5-019 Labels Eight; Fancy Pants Christmas Magic Chestnuts Roasting, Bough of Holly, and Yuletide Greetings; Clearsnap, Colorbox Dark Moss Fluid Chalk, Black Pigment Inks; JustRite Stampers Rectangle Block, Special Ocassions 95 pt, Times New Roman 50 pt; SCRAPBOOK ADHESIVES by 3L, 3D Foam Squares, E-Z Runner; Brads; Black and Dark Red Cardstock.

First, cut/emboss one strip of Yuletide Greetings (green) and one strip of Bough of Holly (red) using the S7-016 Poinsettia Border Grand die template. Sand both borders to give them a distressed look (and to make it easier to see where to cut apart). With scissors, trim the green strip into four pieces and cut the poinsettia flowers from the red piece.

From the Chestnuts Roasting (light green), cut/emboss four S5-019 Labels Eight #4, sand the embossed ridge and ink the outside with Dark Moss ink.

Cut/emboss S7-014 Classic Lace Border Grand twice, with light green cardstock, ink the edges with Dark Moss ink.

These are the pieces, along with A2 sized dark red card base, and 4×5.25” black cardstock.

Spell out “Merry Christmas” with JustRite Stampers, and stamp with Black ink onto the labels, on the right side of the labels.

To assemble the flower piece, adhere the red flower directly on top of the green flower. The die template cuts the flower petals so they can be lifted, curled or otherwise altered.  Place three yellow brads in the center of the red poinsettia.

Flip the piece over and place 3D Foam Squares on each of the petals. Notice how the petals sit above the green background.  Use E-Z runner on the rest of the poinsettia piece, label and lace border. Assemble as shown.

I wish you a Merry start on your Christmas cards!

Beth

Let it snow?  You might think I’ve lost my mind.  You might be right!  I’m not ready for snow in Chicago yet. But I couldn’t resist playing with my Spellbinders™ Limited Edition die templates.  That’s right, the S4-222 Create A Flake One and S4-223 Create A Flake Two, as well as the S4-224 Snowflake Border Petite and S5-017 Snowflake Frame will not be manufactured after November 30, 2009.  Get them from your favorite Spellbinders™ retailer while you can!

Put away your mittens and coats and grab your craft supplies.  My card base is 5.5×11″ white cardstock, folded in half.  The snowflakes are assembled from Core’dinations cardstock, I used 4 graduated tones of blue and both the S4-222Create A Flake One and S4-223 Create A Flake Two die template sets.

I cut two colors from each Create A Flake set, which gave me lots of snowflake shapes, sizes and colors to build from.  Individual die cuts were sanded to reveal the colored core of the Core’dinations cardstock. Each flake is assembled using SCRAPBOOK ADHESIVES by 3L 3D Foam Squares for extra dimension, and brads.

I cut/embossed the S4-224 Snowflake Border Petite on the front of the card, then inked through the die template like a stencil.  This cut the detailed edge and snowflakes and embossed the pinking edge and detail. 

I used a scrap of the blue cardstock to cut/emboss additional snowflakes, this time from the S4-224 Snowflake Border Petite, so that I could add them to the openings on the front.  Brads hold them in place inside of the card.  Doesn’t it look like they are attached to the front of the card?

I couldn’t let those snowflakes get lonely inside the card.  I cut/embossed and sanded the inside frame from S5-017 Snowflake Frame.  JustRite Stampers allowed me to customize the greeting with their fonts and rectangluar stamper.  Clearsnap Colorbox Smoke Blue Pigment ink is the color I used for both stenciling with an Ink Applicator on the front and stamping on the inside.

I have snowflake die cut pieces left, I’ll save them for another project.  Remember, get your Spellbinders™ Seasonal Limited Edition die templates soon! See the complete list here.  And lets hope Mother Nature doesn’t take this card seriously!

Beth

Trick or Treat!  No tricks, just treats for you here!  The first treat is a double on the Tattered Angels Blog Hop!  Design Team Member Lisa Rapp and our very own Eli Harlan are both showcasing some Tattered Angels love today, be sure to visit both of their blogs.  And don’t forget to see what Tattered Angel’s Blog has in store too.

Now on to Halloween.  Halloween is for kids, and kids of all ages dress in costumes!  Super Heros, Princesses, Monsters, Celebrities, Politicians, Ninjas, Ghosts and just about anything else goes when it comes to Halloween.  Some people even wear costumes to work! This picture is the Spellbinders™ crew in Phoenix!  I’m sure they had a lot of fun, and plenty of candy too!

For today’s post I put together a cute Halloween mini book.  I had a sheet of vintage images waiting for the perfefct project, and this is it!  I didn’t take a lot of step shots, but you will see it is a pretty straight forward book.

I started with the largest of the S4-227 Pumpkins and cut 4 chipboard pumpkin shapes as bases for the pages.  In my Wizard™ I cut/embossed 8 more from patterned paper, Fancy Pants Trick or Treat Collection and an orange piece from Daydreams, these covered both sides of the chipboard.  I spritzed the pumpkin die cuts with Glimmer Mist by Tattered Angels, and when they were dry I sanded the edges.  I have several colors of Glimmer Mist and tried to match them with the colors of the papers.  Look at the results!

Ohhhhh, glimmery!

I cut a piece of Core’dinations Black Magic Cardstock with the S4-227 Pumpkins Nestabilities, to make pumpkin shaped frames by nesting the die templates.  See how I set them on my Magnetic Spacer Plate.  This gave me 2 frames and 3 full pumpkins.  I cut/embossed then sanded the black side to reveal the orange color underneath.

The rest of the book is just stacking, layering, inking, sanding and having fun.

The book includes a variety of Spellbinders™ die templates, including the following:
S4-227 Pumpkins; S7-014 Classic Lace Border Grand, S5-014 Deckled Mega Rectangles SM; S4-131 Classic Scalloped Rectangles SM; S4-235 Fancy Tags; S4-169 Small Labels; S4-200 Flower Bouquet; S4-161 Labels One; S4-190 Labels Four; S5-019 Labels Eight; S4-233 Labels Nine, S4-134 Classic Paisley.

Other supplies include: Fancy Pants, paper; Tattered Angels, Glimmer Mists; Crafty Secrets, Heartwarming Vintage images; Creative Impressions, Ribbons; Clearsnap, Colorbox Charcoal Fluid Chalk Ink; Copic, Atyou Spica Pitch Black; Cardstock; Alpha rub-ons; adhesives; hole punch; book ring.

Happy Halloween!
Beth

Reminder: Don’t forget the Spellbinders™ and Tattered Angels blog hop with our designers! Today, we are visiting Design Team Member Kimberly Crawford’s blog “For The Love of Paper” to see what kind of eye candy she will inspire us with. Come back to our blog to find out who the next designer will be to create a wonderful project!

Did you see Eli’s wonderful “contained” project? I love how she used the combination of many Spellbinders™ die templates. Very clever! So from a box to a container to … a bag! I thought it would be fun to do a shaped bag - perfect for that special little tricker or treater.

I brought out my S4-227 Pumpkins Nestabilities®, S4-228 Nested Maple Leaf, S7-017 On The Vine Border Grand and S3-150 Ribbon Tags Trio Two. Using the Fancy Pants Designs Trick or Treat paper, I cut/embossed two S4-227 Pumpkins Nestabilities® die #5 (the smallest being die #1).

Then I put the two pumpkins (pokka dots sides out) together and used a paper piecer to piece holes to look like stitching. When I was in high school, I almost failed sewing class (thanks Mrs. Fish for putting up with me!) - I did better in wood class! LOL! So I’m playing it safe and making holes before stitching the brown embroidery floss.

After stitching together the pumpkins, I cut/embossed the S4-228 Nested Maple Leaf #1 and the S3-150 Ribbon Tags Trio Two (the rounder tag with the embossed corner as shown) with Core’dinations ColorCore cardstock.

Cut/Emboss the S7-017 On The Vine Border Grand but leave the paper inside the die template as we will stencil with Clearsnap ColorBox Fluid Chalk Dark Moss. Set aside.

Since the pumpkins had that distressed look, I sanded the S3-150 Ribbon Tags Trio Two tag and stamped a cute image from Hero Arts Owl-Oween stamp set and added googly eyes for a fun accent. Then I added ribbon tails on each side of the tag and adhered onto the bag. I wrote my niece’s name (Jessica) on the maple leaf die cut which I also sanded and used foam adhesive.

Going back to the vine border, choose a part of the border to embellish the pumpkin stalk and adhere. Then I punched two holes - one in the front and one in the back. Thread a ribbon through both holes to make a handle. To finish off the embellishing, I added one of the leaves from the vine border with foam adhesive to give it dimension.

So all we had to do is fill with candy and add a little toy - it’s ready for Halloween!

Happy Tuesday everyone!

We are also continuing to celebrate our blog hop with Tattered Angels. Today our host for the day is my good friend Debbie Seyer. Be sure to visit her blog, A Peak Into my Stamping Room, to see her amazing and glimmering project.

I could hardly contain myself on Saturday when I saw Margie’s post, Thinking Inside the Box. How adorable is that? I think we all know… Plus anyone who can add candy corns to a project is a winner in my book. Her inspiring project lead me to see what I could do to think inside and outside the box. So I created another container (inside the box), only this one is round (outside the box). Check it out!

I was trying to think of a way to make a container bottom that attached easily. Usually I think of die cutting a circle and snipping little slits about every ¼”. But this is what I came up with instead…

I gathered the following supplies: Wizard™, S4-114 Standard Circles LG, S4-124 Classic Scalloped Circles LG, S7-017 On the Vine Border Grand, Crafty Secrets Heartwarming Vintage Collection Classic Paper Designs, Core’dinations blue cardstock, Clearsnap ColorBox Cocoa Pigment Ink, Tattered Angels Turquoise Blue Glimmer Mist, Glue Dots Continuous Line, PVA glue.

I save “cereal board,” lightweight chipboard, from packaged foods to use in craft projects. This one just happened to be Mini Strawberry Newtons…yum. I cut S4-114 Standard Circles LG, #7, (counting #1 at the center) but did not emboss.

Then I cut S4-124 Classic Scalloped Circles LG, #6 from Blue Core’dinations cardstock and didn’t emboss. I added glue to the colored side of the chipboard circle and placed it on the center of the S4-124 Classic Scalloped Circles LG. (A little note: If using a wet glue, allow it to dry totally before embossing or, like me, you’ll have glue running out onto your mats…oops.)

I chose a paper from the Crafty Secrets paper packs and left it a full 6″. If you want your container to be shorter than that, trim it down. I rolled the paper into a tube and adhered it with Glue Dots, Continuous Line, just crossing over the ends at 1/8″.

I embossed the bottom by using a regular embossing sandwich:

• White Master Mat
• Container bottom with chipboard down on the Mat (this is the important part)
• Embossing Pad
• White Master Mat

I folded up all the scallops to fit the tube inside of them.

I added a generous line of glue just to the inside of the scallops and fit the cylinder into them. Working around the bottom edge, I placed one hand inside the tube for support and the other on the scallops to make sure the glue held. I worked my way around until they were all well adhered. This is the most tedious part of the process but is worth the effort.

I embellished the container with S7-017 On the Vine Border Grand die template by I cutting/embossing blue cardstock with the W-026 Grand Cut Mat Kit. Then I inked through the die template as a stencil with Clearsnap ColorBox Cocoa Pigment Ink.

If you want to see a little demonstration on how to cut the Borderabilities® Grand, check out this video from Stacey. If you don’t have the W-026 Grand Cut Mat Kit, go to 1:50 on the meter to see the section showing how to cut using the mats that came with your machine.

I added the S7-017 One the Vine Border Grand to the container. The fun little bonus was that it fit perfectly. I was able to hook the two ends together. Using PVA glue, I added small touches of glue around the piece and then added dimension to it by curving the leaves and stems that were not glued down.

As a final touch, I sprayed it with Turquoise Blue Glimmer Mist. Finito!

Since I used only cardstock on the sides of the container, it is not super strong. I could probably reinforce the item by using an additional piece of cardstock, simply glued to the original OR I could use some more light weight chipboard. Well, whatever you choose to do, have fun and see what you can create.

Eli

Today’s Tattered Angels Blog Hop Hostess with the Mostess is Heidi Blankenship. Her personal blog, Embellished Dreams is chock full of Tattered Angels artwork, take some time to look around! This post is especially cool, enjoy!

I”m still having with foam!  Remember this Fall Wreath I made with embossed foam?  I had a few extra S4-228 Nested Maple Leaves left over from that project.  When I saw Eli’s Savvy Saturday and Margie’s Cushy project, I remembered my embossed foam leaf was still waiting to play.  Hmm, that would make a nice stamp!  Remember how nicely these embossed with the I2-1009 Flourish when I heated the Impressabilities™ with my iron?

I attached it to a clear block with a bit of adhesive. Then I inked the leaf with Clearsnap Colorbox Chestnut Roan Fluid Chalk Ink.

 Actually I used the same ink, but from 2 different ink pads, and I think it looks pretty cool!

I also added the S4-226 Harvest Border Petite , with a green ribbon under it to add some color.  It’s wrapped around the My Minds Eye Penny Lane Chasse cardstock.  I inked through the Borderabilities™ die template like a stencil, to color the embossed areas.  That piece is mounted on brown cardstock.

Enjoy Fall!
Beth

Tattered Angels & Spellbinders™ are in a blog hop all month long! Today, our Design Team Member Karen Taylor will inspire us with her project. Please go visit her blog and see what kind of eye candy she has in store for us! Come back to our blog and find out who is next on the hop!

Taking Eli’s Savvy Saturday’s idea of using craft foam, I took it to another level to make a cushy project of my own. Instead of only using the foam as a stamp, why not use it as an element for my home decor too. I had a red tin bucket and wanted to do add something to display on my hallway table.

From my Spellbinders™ collection, I got out: S7-017 On The Vine Border Grand and S4-230 Labels Six die templates #6 #4 & #3 (#1 being in the smallest).

First with the 4.5×12″ strip of craft foam, I cut/embossed S7-017 On The Vine Border Grand. I left the craft foam in the die template and sprayed Tattered Angels’ Gold Glimmer Mist. Carefully, take out the die cut to set aside to dry. Clean your die template immediately to avoid staining.

With the JustRite Stampers’ Times New Roman Uppercase Font Set 50 pt. and the smaller Horizontal Wood Stamper, I stamped “Fall ‘09″ on a piece of cream cardstock and proceeded to cut/embossed with the S4-230 Labels Six die #3. Taking an orange cardstock from my scrap stash, I cut/embossed the S4-230 Labels Six #4 to mat behind the stamped cream cardstock.

Using Cosmo Cricket Early Bird Collection, I cut/embossed the S4-230 Labels Six #6. Then I cut/embossed a part of S7-017 On The Vine Border Grand with craft foam to use as a stamp. With the various colors of the Clearsnap Queue Inks, I stamped parts of the leaves and vine onto the label.  Then adhered the matted “Fall ‘09″ image onto the stamped label with foam adhesive to give it a 3D effect.

With adhesive dots, I adhered the foam vine onto the tin bucket and then adhered the “Fall ‘09″ label in the middle. Now to add some gourd and squash! It’s ready to display for little “treat or treat” visitors and even for that Thanksgiving dinner!

Hope it makes you look at craft foam in a different way!
MargieH

I can not tell a lie…I love S4-227 Pumpkin Nestabilities® die template, and since it is a limited edition, I want to give you plenty of reasons to get it before it is gone. But before I give you this Savvy Saturday’s tutorial, let’s hear it for our Tattered Angels Blog Hop:

They are hosting it with our Design Team and my friend, Kazan Clark at Nunu Toolies is on deck today. Make sure to visit her blog to see her amazing project using products from Spellbinders™ and Tattered Angels.

Halloween is just around the corner and I wanted a little “tchotchke” to put on my table {my 10 year old said she liked that word, “tchotchke” yesterday…lol…”Me too sweetie!”} Anyway, I’m revisiting a technique that I love: making a stamp with Spellbinders™ die templates and fun foam. Check it out when you are done here.

With the technique in mind, I gathered fun foam, orange ink, S4-227 Pumpkins Nestabilities® and some Dottie Ann Magic Mesh. I love Dottie Ann’s shape and its adhesive backing and thought it might make some fun stamping texture. Here is the full supply list.

Supplies: S4-226 Harvest Border Petite, S4-227 Pumpkins Nestabilities®, S5-006 Curved Rectangles, S4-161 Labels One, S4-162 Labels Two, S5-019 Labels Eight, S4-169 Small Labels, Wizard™, W-026 Grand Cut Mat Kit, Core’dinations Green color core cardstock (1-3/4″ strips), Magic Mesh Dottie Anne, Clearsnap ColorBox Chestnut Roan chalk ink, Creative Impressions mini brads and photo turns, Glue Dots, lines and dots; SCRAPBOOK ADHESIVES by 3L, 3D squares; white cardstock, Orange Distress Ink, white letter stickers, fun foam, “Happy” stamp, sandpaper, double sided removable tape

I began by creating my own embossing template. I placed a strip of Dottie Ann onto cardstock. Since I didn’t want to notice the “seam” in the final project, I cut off the bottom edge.

I added the second piece, cutting off one edge, placing the cut edges together, matching up the circles.

I cut the fun foam with S4-227 Pumpkin Nestabilities® using the regular Wizard™ cut sandwich:

• Master Mat
• Spacer Plate
• Die Template with cut ridges facing up
• Fun Foam
• Master Mat

.

.

Embossing followed its regular sandwich:

• Master Mat
• Texture (in this case my Dottie Ann sheet)
• Fun Foam
• Embossing Pad
• Master Mat

.

.

After I ran the pumpkin stamp through the Wizard™ with the Dottie Ann texture sheet, I noticed how flat the embossing was, I thought the embossing was too “thin” to show up as a stamp texture. But it was worth a try…I taped it (double sided removable) to a foam block, inked it up and pressed it onto smooth white cardstock and what do you know? I got the look I wanted! I stamped 4 more and love them!

I cut each stamped image out with a different die template. I used #5 die template from the following sets: S5-006 Curved Rectangles, S4-161 Labels One, S4-162 Labels Two,  S4-169 Small Labels, and used #4 with S5-019 Labels Eight.

Using the S4-226 Harvest Border Petite and my W-026 Grand Cut Mat Kit, I created a long border. Since there is only one cut edge on this Borderabilities® die template, you can create endless borders. This is what I found worked the best:

I built the sandwich “upside down,” placing pieces of double sided removable tape at the ends of the Master Mat and sticking the Core’dinations strip onto it. I added the die template at one end, cut edge down, carefully placing the W-024 Magnetic Spacer Plate and adding the other Master Mat. Through the Wizard™ it went.

To cut the center section, I moved the die template down until the pumpkin “hole” and edge fit snuggly.

I cut again and then repeated the process for the last section.

I embossed the first section and then sanded it–giving me the “fresh” emboss (versus embossing and then running it through the Wizard™ for the second cut and flattening the first emboss). I repeated this 2 times to complete the strip. I created two borders, overlapped and adhered them.

To assemble, I laid out my pumpkins, added the stickers and stamped “Happy.” I embellished the tags with mini pumpkin die-cuts, brads and photo turns and accordion folded the piece so it would stand up on its own. Yeah! Here is is!

And to what it says, “Happy Halloween” not only from us but also from Tattered Angels!

Enjoy the weekend, Eli

Last weekend, I went shopping for scrapbook supplies. I found something that I really wanted to use for today’s post…Tattered Angels‘ Glimmer Screens - Garden Ironworks. One particular screen caught my eye - the iron gate! I had the Raven Glimmer Mist at home that would be a perfect match so I “had to have it.” LOL!

Using the screen and Glimmer Mist, I would put them into the Wizard™ to letterpress into an orange cardstock that was in my scrap pile. Beware of dripping Glimmer Mist after spraying the screen (MUHAHAHAHA!!!), my first try was a mess! Let the excess mist drip off the screen first and then place into the sandwich.

Quickly letterpress the cardstock by using the following sandwich (from the bottom):
White Master Mat
Copy paper (for protection)
Screen (Glimmer Misted side UP)
Cardstock
Tan Embossing Pad
White Master Mat

Next, I misted a big white flower. I suggest misting two coats (dry between coats). The front of the flower was dark but didn’t have the glimmer I was looking for. So I flipped the flower to see what happened there - it had all this glimmer, so pretty! I will be using the back of the flower instead. Note to self: mist the back of the flower next time! LOL!! For the center of the flower, I cut/embossed four of S4-227 Pumpkin Nestabilities® die template #2 (#1 being the smallest size). Fold each pumpkin in half and with wet adhesive, adhere each side of pumpkin to the next. For more details, please refer HERE. 

After I stamped “Happy Owl-Oween” from Hero Arts Owl-Oween set, I cut/embossed one of the S4-234 Ribbon Tags Trio Two over the sentiment. I love how this set can accommodate wider ribbons. The black organza ribbon I had in my stash is about 5/8″ wide and the slot still had room! Using the same stamp set, I stamped an owl image onto Core’dinations ColorCore cardstock, cut out the image and glittered its eyes.

Adding more embellishments, I cut out a Halloween image from Crafty Secrets Heartwarming Vintage Cuts. For texture, I cut S4-228 Nested Maple Leaf #1 with fabric paper and orange felt (note: an extra shim like a piece of cardstock may be needed for the cut to go through or cut twice if it’s thick). For a journal “box,” I cut/embossed the largest maple leaf (die #3) with Core’dinations cardstock and sanded the edges. I inked the edges of my mat and page with Clearsnap Queue Ink. Adhering all the elements as shown onto Fancy Pants Treat or Treat Collection made this layout one of my favorite Halloween pages!

Don’t forget all this month, we are showcasing our designers who used their talent to come up with beautiful projects using Spellbinders™ and Tattered Angels‘ products. Please take a look at what Holly Simoni has inspired you with today! Come back and visit us so that you know who else will dazzle you!

Have a great day!
MargieH

Have you heard?  We’re doing a blog hop with Tattered Angels, makers of Glimmer Mist and much more. Today, Design Team Member Julie Overby  has blogged a project, go check it out! You can also check out the Tattered Angels Blog for even more ideas.

Did you love Margie’s Savvy Saturday, where she cut apart the S4-227 Pumpkins Nestabilities®?  That got me thinking about the S4-220 Nested Pine Trees.  I wanted to give them some dimension. 

I pulled together some supplies: Spellbinders™ S4-220 Nested Pine Trees, S4-142 Long Classic Rectangles LG #4 and 5; Spellbinders™ Impressabilities™ I2-1006 Floral and Stone, I2-1009 Flourish, I2-1002 Paisley.  I also included 7gypsies, Gypsy Market Paper; SCRAPBOOK ADHESIVES by 3L, 3D Foam Squares; Tattered Angels, Pearl Glimmer Mist; Clearsnap, Colorbox Chestnut Roam and Dark Moss Fluid Chalk Ink; Stampers Anonymous, Mini Ornates Stamps; Core’dinations Color Core Cardstock; tan and brown cardstock; sanding block.

I cut S4-220 Nested Pine Trees #3 with Core’dinations Cardstock, then embossed with one of the Impressabilities™ templates.  I repeated this step 2 more times, with a different tone of green, so that I had 3 large Nested Pine Treea die cuts, each embossed with a different Impressabilities™ template.  I trimmed the lightest green tone for the top section of the tree, then the medium tone for the center, and left the darkest tone full size. I cut a trunk from dark brown cardstock.  I inked the edges of the tree with Dark Moss ink.

I sanded the embossed areas that would show, then spritzed with Pearl Glimmer Mist.  I cut/embossed 2 tones of tan cardstock with S4-142 Long Classic Rectangles LG # 4 and 5, then inked the edges with Chestnut Roan ink.  I stamped a Mini Ornates sentiment with Chestnut Roan onto the smaller rectangle.

To give the tree depth, I lined the lower curved edges with 3D Foam Squares, but used normal flat adhesive at the top of the tree.

I assembled the card as shown below. The “lift” and inked edges give dimension and shadow.

Enjoy the day!

Beth